建站
咨詢
售后
建站咨詢
新聞中心
安全性
設置客戶端連接后進行任何其他指定前需要使用的密碼。
警告：因?yàn)閞edis速度相當快，所以在一臺比較好的服務器下，一個外部的用戶可以在一秒鐘進行150K次的密碼嘗試，這意味著你需要指定非常非常強大的密碼來防止暴力破解。
- # requirepass foobared
- requirepass beijing
下面我們做一個實驗，說明redis的安全性是如何實現的。
我們?cè)O(shè)置了連接的口令是beijing
那么們啟動一個客戶端試一下:
- [root@localhost redis-2.2.12]# src/redis-cli
- redis 127.0.0.1:6379> keys *
- (error) ERR operation not permitted
- redis 127.0.0.1:6379>
說明權限太小，我們可以當前的這個窗口中設置口令
- redis 127.0.0.1:6379> auth beijing
- OK
- redis 127.0.0.1:6379> keys *
- 1) "name"
- redis 127.0.0.1:6379>
我們還可以在連接到服務器期間就指定一個口令，如下:
- [root@localhost redis-2.2.12]# src/redis-cli -a beijing
- redis 127.0.0.1:6379> keys *
- 1) "name"
- redis 127.0.0.1:6379>
可以看到我們?cè)谶B接的時候就可以指定一個口令。
主從復制
Redis主從復制配置和使用都非常簡單。通過主從復制可以允許多個slave server擁有和master server相同的數據庫副本。
1、redis主從復制特點:
(1)、master可以擁有多個slave
(2)、多個slave可以連接同一個master外，還可以連接到其他slave
(3)、主從復制不會阻塞master，在同步數據時，master可以繼續處理client請求
(4)、提高系統的伸縮性
2、redis主從復制過程:
當配置好slave后，slave與master建立連接，然后發送sync命令。無論是第一次連接還是重新連接，master都會啟動一個后臺進程，將數據庫快照保存到文件中，同時master主進程會開始收集新的寫命令并緩存。后臺進程完成寫文件后，master就發送文件給slave，slave將文件保存到硬盤上，再加載到內存中，接著master就會把緩存的命令轉發給slave，后續master將收到的寫命令發送給slave。如果master同時收到多個slave發來的同步連接命令，master只會啟動一個進程來寫數據庫鏡像，然后發送給所有的slave。
3、如何配置
配置slave服務器很簡單，只需要在slave的配置文件中加入如下配置
- slaveof 192.168.1.1 6379 #指定master的ip和端口
下面我們做一個實驗來演示如何搭建一個主從環境:
- # slaveof
- slaveof localhost 6379
我們?cè)谝慌_(tái)機器上啟動主庫(端口6379)，從庫(端口6378)
啟動后主庫控制臺日志如下:
- [root@localhost redis-2.2.12]# src/redis-server redis.conf
- [7064] 09 Aug 20:13:12 * Server started, Redis version 2.2.12
- [7064] 09 Aug 20:13:12 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
- [7064] 09 Aug 20:13:12 * The server is now ready to accept connections on port 6379
- [7064] 09 Aug 20:13:13 - 0 clients connected (0 slaves), 539512 bytes in use
- [7064] 09 Aug 20:13:18 - 0 clients connected (0 slaves), 539512 bytes in use
- [7064] 09 Aug 20:13:20 - Accepted 127.0.0.1:37789
- [7064] 09 Aug 20:13:20 * Slave ask for synchronization
- [7064] 09 Aug 20:13:20 * Starting BGSAVE for SYNC
- [7064] 09 Aug 20:13:20 * Background saving started by pid 7067
- [7067] 09 Aug 20:13:20 * DB saved on disk
- [7064] 09 Aug 20:13:20 * Background saving terminated with success
- [7064] 09 Aug 20:13:20 * Synchronization with slave succeeded
- [7064] 09 Aug 20:13:23 - 0 clients connected (1 slaves), 547380 bytes in use
啟動后從庫控制臺日志如下:
- [root@localhost redis-2.2.12]# src/redis-server redis.slave
- [7066] 09 Aug 20:13:20 * Server started, Redis version 2.2.12
- [7066] 09 Aug 20:13:20 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
- [7066] 09 Aug 20:13:20 * The server is now ready to accept connections on port 6378
- [7066] 09 Aug 20:13:20 - 0 clients connected (0 slaves), 539548 bytes in use
- [7066] 09 Aug 20:13:20 * Connecting to MASTER...
- [7066] 09 Aug 20:13:20 * MASTER <-> SLAVE sync started: SYNC sent
- [7066] 09 Aug 20:13:20 * MASTER <-> SLAVE sync: receiving 10 bytes from master
- [7066] 09 Aug 20:13:20 * MASTER <-> SLAVE sync: Loading DB in memory
- [7066] 09 Aug 20:13:20 * MASTER <-> SLAVE sync: Finished with success
- [7068] 09 Aug 20:13:20 * SYNC append only file rewrite performed
- [7066] 09 Aug 20:13:20 * Background append only file rewriting started by pid 7068
- [7066] 09 Aug 20:13:21 * Background append only file rewriting terminated with success
- [7066] 09 Aug 20:13:21 * Parent diff flushed into the new append log file with success (0 bytes)
- [7066] 09 Aug 20:13:21 * Append only file successfully rewritten.
- [7066] 09 Aug 20:13:21 * The new append only file was selected for future appends.
- [7066] 09 Aug 20:13:25 - 1 clients connected (0 slaves), 547396 bytes in use
我們?cè)谥鲙?kù)上設置一對鍵值對
- redis 127.0.0.1:6379> set name HongWan
- OK
- redis 127.0.0.1:6379>
在從庫上取一下這個鍵
- redis 127.0.0.1:6378> get name
- "HongWan"
- redis 127.0.0.1:6378>
說明主從是同步正常的.
那么我們?nèi)绾闻袛嗄膫€(gè)是主哪個是從呢?我們只需調用info這個命令就可以得到主從的信息了,我們?cè)趶膸?kù)上執行info命令
- redis 127.0.0.1:6378> info
- .
- .
- .
- role:slave
- master_host:localhost
- master_port:6379
- master_link_status:up
- master_last_io_seconds_ago:10
- master_sync_in_progress:0
- db0:keys=1,expires=0
- redis 127.0.0.1:6378>
里面有一個角色標識,來判斷是主庫還是從庫,對于本例是一個從庫，同時還有一個master_link_status用于標明主從是否異步，如果此值=up，說明同步正常;如果此值=down，說明同步異步;
db0:keys=1,expires=0， 用于說明數據庫有幾個key,以及過期key的數量。
【編輯推薦】
- Redis2.6將釋出 新功能一覽
- 使用Redis的五個注意事項
- Redis高可用性之Failover過渡方案
- Redis能干啥？細看11種Web應用場景
- 主流NoSQL數據庫之Redis全面評測
本文標題：Redis高級實用特性：安全性與主從復制
文章出自：http://m.jiaoqi3.com/article/dppdgoe.html
